Abus Terxon Instructions D'installation page 98

9. When both entered numbers match, then the device confirms the
successful entry with a high-pitched signal. Otherwise, the device
emits a low-pitched signal.
10. After you have made your selection, you can continue with other
commands or terminate the connection by pressing the # key.
11.3.2.5 Message management
Using this function, you can record the alarm and restore messages 1-8 (plus
the site message) as in the main menu.
It is also possible to record a memo over remote access as well as locally on
the GSM dialer (see point 11.2). The memo can be played locally on the GSM
dialer or by another user over remote access.
4. Establish a connection to the GSM dialler.
5. Select one of the following options:
-
-
-
-
-
Recording an alarm message
Press *4, then a number from 1-8 corresponding to the
message being recorded. You will now here a short beep
signal. Speak clearly into the telephone. Press 0 to stop
recording.
Playing an alarm message
Press 4, then a number from 1-8 corresponding to the
message to be played. The previously recorded message is
then played. Press 0 to stop playback.
Recording a restore message
Press *5, then a number from 1-8 corresponding to the
message being recorded. You will now here a short beep
signal. Speak clearly into the telephone. Press 0 to stop
recording.
Playing a restore message
Press 5, then a number from 1-8 corresponding to the
message to be played. The previously recorded message is
then played. Press 0 to stop playback.
Recording a memo
Press *0, then a number from 1-8 corresponding to the
message being recorded. You will now here a short beep
signal. Speak clearly into the telephone. Press 0 to stop
recording.
98