Call Routing - Abus Terxon Instructions D'installation

•
Call Active
The output is activated when the GSM dialer triggers and a dialling
procedure is started. The output is deactivated when all devices are
dialled or the call is cancelled.
•
Call Successful
The output is activated when the message is sent correctly and
deactivated when the device triggers again.
•
Call Fail
The output is activated when the message fails and deactivated when
the device triggers again.
•
Remote Control 1-4
These outputs can be activated and deactivated remotely over the
telephone.
•
Supply Low
The output is triggered when the power supply of the device falls
below 10.5 V DC.
•
Signal Low
The output is triggered when the GSM signal falls below the defined
level (see "Alarm states" for more details).
8.3.6.2 Configuring the outputs
5. Enter your user code. Scroll through the menu options using the
keys, or alternatively press
Confirm by pressing
Output 1.
6. Use the scroll keys
7. Use the scroll keys
one of the output types detailed previously.
8. Press
8.3.7

Call Routing

Under this menu option, you can define which contact addresses receive
messages (text or voice). For example, the alarm message A is transferred to
↑↓ ENT to select
. The following message is displayed:
and confirm the output using
and confirm using
to exit the menu.
to display the "Outputs" menu point.
Outputs
82
.
in order to select