Starting The Programming Menu; Ending The Programming Menu - Abus Terxon Instructions D'installation

Date & Time
View Log
Test Options
8.1.1

Starting the programming menu

4. In standby mode, the GSM dialer displays the temperature, time and
date.
5. Enter your user code (default: 1234). The display now shows the first
menu point.
6. Scroll through the menu options using the
alternatively press the direct access key to switch to the relevant
function (e.g.
8.1.2

Ending the programming menu

IMPORTANT:
The programming menu must be exited completely in order for the GSM dialer
to work properly! If the programming menu is still open, then the GSM dialer
will not react to triggers from the inputs!
3. Press the
Used for setting the system date and time.
Used for displaying the event log.
Used for executing the available test options.
SD3 +29°C
12:07 01May08
↑↓ ENT to select
Contact Details
for the View Log).
key repeatedly until the display shows the following.
Press [ENT]
to leave the menu
67
keys, or