Access Codes; Changing The User Code - Abus Terxon Instructions D'installation

8.3.4

Access Codes

The GSM dialer dialler is protected from unauthorised access by two codes:
•
User code
This four-digit code is necessary for programming the device and
cancelling dialling procedures. The default is "1234".
•
Remote code
This four-digit code is necessary for remote programming of the
device. The default is "5678".

8.3.4.1 Changing the user code

5. Enter your user code. Scroll through the menu options using the
keys, or alternatively press
point.
Confirm by pressing
Code".
6. Press
7. Enter your new four-digit user code and press
8. Press
8.3.4.2 Changing the remote code
5. Enter your user code. Scroll through the menu options using the
keys, or alternatively press
point.
↑↓ ENT to select
Access Codes
. The following message is displayed: "User
to select. The display shows the following:
New User Code?
to exit the menu.
↑↓ ENT to select
Access Codes
to display the "Access Codes" menu
****
to display the "Access Codes" menu
78
to confirm.