•
10 contact numbers
Aside from the telephone number, each contact can be given a
contact name, message type (text or voice) and confirmation type.
•
8 voice messages plus 1 site message
Using the integrated microphone and loudspeaker, the recording and
playback of up to eight voice messages and a general site message
can be made. Additionally, eight restore messages can also be
recorded. Each message can be up to 30 seconds long.
•
8 text messages plus 1 site message
The GSM dialer can manage up to eight alarm messages and a
general site message. Additionally, another eight restore messages
can also be entered. Each message has a maximum length of 40
characters.
•
Acknowledgement and cancellation function
The called contact can confirm each incoming voice message over
the telephone and can also cancel dialling procedures using the other
functions.
•
4 outputs
The four negative switching outputs can be triggered by a wide range
of system events. The outputs can also be switched remotely over the
telephone. The status of outputs 1 and 2 is shown in the display
(OP1/OP2).
•
Temperature sensor
The ambient temperature is permanently shown on the standby
display. These values allow the switching of outputs according to the
minimum and maximum temperature.
•
Time and date
The time and date are permanently shown on the standby display.
This system details are also added to the text messages and event
log procedures.
•
Listen and speech mode
In these modes, the operator can listen to the object and add
comments using the integrated microphone and loudspeaker.
56