Abus Terxon Instructions D'installation page 75

Select the View Log specified by your SMS service centre. This can
be either TAP or UCP.
•
SMS TEL. Number
Some service centres require the calling number before they accept a
processing request for an SMS. This is also used for the clear
charging of SMS messages. Enter the phone number of the analogue
line here.
Examples:
-
-
-
-
-
8.3.3.4 Display
•
Flash On Message
-
-
•
Beep On Message
-
-
•
Temperature
-
-
•
Line Fault
Germany/T-Com: Select the View Log UCP8N1 (service
centre 0193010)
Germany/Anny Way: Select the View Log UCP8N1 (service
centre 09003266900)
Austria: Select the View Log TAP7E1 (service centre
0900664914)
Denmark: Select the View Log UCP8N1 (service centre
9011201)
Switzerland: Select the View Log UCP8N1 (service centre
0794998990)
When this function is activated (ON), the GSM dialer display
flashes on and off when a reminder message is waiting
(default). Playing the reminder message stops the flashing.
When the function is deactivated (OFF), the GSM dialer
does not flash.
When this function is activated (ON), the GSM dialer beeps
each minute when a reminder message is waiting. Playing
the reminder message stops the beeping.
When the function is deactivated (OFF), the GSM dialer
does not flash (default).
When this function is activated (ON), the display shows the
current temperature (default).
No temperature is displayed when this function is
deactivated (OFF).
75