Abus Terxon Instructions D'installation page 80

-
-
8. Press
8.3.5.2 Confirmation settings
The confirmation settings are used to define whether the GSM dialer should
dial the other contact addresses after confirmation or cancel the dialling
procedure.
To confirm the call, the recipient must press the number 8 on the telephone
keypad. If the call is not confirmed, then the GSM dialer calls the next
programmed contact number.
Configuring the confirmation settings
6. Enter your user code. Scroll through the menu options using the
keys, or alternatively press
point.
Confirm by pressing
By Options".
7. Use the scroll key
8. Press
9. Use the scroll keys
using
-
-
Dialling attempts can only be cancelled by entering the user
code.
Code Or Restore
Dialling attempts can only be cancelled by entering the user
code or removing the trigger signal.
Restore Only
Dialling attempts can only be cancelled by removing the
trigger signal.
to exit the menu.
to display the following: "Confirmation settings".
to select. The display shows the default setting "Anyone".
:
Anyone
Further dialling procedures are cancelled when the message
is confirmed (default).
No One
to display the "Ack & Abort" menu
↑↓ ENT to select
Ack & Abort
. The following message is displayed: "Clear
and confirm one of the following options
80