Setting The Preset Time - Harvia SENTIO Professional B2 Instructions D'installation Et Mode D'emploi

Instructions for use for the user

9.6. Setting the preset time

WARNING!
Risk of fire
Flammable objects that are placed on the heater will ignite and cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before you activate the preset timer function.
You can set the preset time in 15 minute intervals. The maximum preset time
totals 24 hours. The preset time is shown in hours and minutes, e.g. 8 hours and
15 minutes is shown as 8.15.
1. Start the sauna heater (see point 9.4. Starting the sauna on page 24).
2. Press the preset time button
► The temperature selector
is shown in the temperature display
3. Press the preset time button
intervals.
4. Once you have reached the required preset time, wait a few seconds.
► The sauna control unit changes to standby mode and the timer
starts running.
► The remaining preset time is shown in the temperature display
The temperature selector
► Once the preset time has elapsed, the sauna heater switches on.
.
6
flashes and the previously set preset time
2
.
3
, to increase the preset time in 15 minute
6
flashes.
2
p. 25/30
EN
.
3