Technical Information; Installation Considerations - Hansgrohe AXOR Starck 28491 1 Série Instructions De Montage / Mode D'emploi / Garantie

Tools Required / Outiles Utiles /
Herramientas Útiles
17 mm
2
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
• Please read over these instructions thoroughly be-
• Three different installations are possible for this
• To prevent scald injury, the maximum output tem-
• Keep this booklet and the receipt (or other proof
2.5 mm
3 mm
10 mm
Installation with rough 28486181 ................... Page 4
Installation with ceiling mounting plate
28470181 .................................................... Page 12
Free installation . ...............................................Page 20
this unit be installed by a licensed, professional
plumber.
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
unit: installation with rough 28486181, instal-
lation with ceiling mounting plate 28470181,
or free installation. Be sure that you know
in advance which installation you will
perform.
perature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum out-
put temperature can be no higher than 112° F.
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 psi
145 psi
120° - 140° F*
176°F*
1.0 gpm