Sygonix TX 4 Mode D'emploi page 63

2. Select one of the individual days or one of the day blocks with
the buttons "–" (5) and "+" (6).
"1" = Monday
"2" = Tuesday
"3" = Wednesday
"4" = Thursday
"5" = Friday
"6" = Saturday
"7" = Sunday
"1 2 3 4 5" = Monday through Friday
"6 7" = Saturday and Sunday
"1 2 3 4 5 6 7" = Monday through Sunday
3. When the desired weekday or block fl ashes in the display,
push „OK" (2).
4. The time display at the top right starts to fl ash (if no time is
programmed yet, "- - : - -"). In addition to the time display, the
number of the memory stop is displayed (P1.....P7).
5. Set the time from which onwards the temperature is to apply
with the buttons "–" (5) and "+" (6) (steps of 10 minutes), e.g.
06:00. Keep the respective button pushed for quick adjust-
ment.
6. Push the "OK" button (2). "SET AT" fl ashes at the upper right
of the display, and below it, the temperature value fl ashes
("SET AT" means "set to...").
7. Set the desired temperature value with the buttons "–" (5)
and "+" (6), e.g. 20.0 °C. Keep the respective button pushed
for quick adjustment.
8. Press the "OK" button (2).
9. Repeat steps 4 to 8 for the next times. If you set "- - : - -" for the
time (between 23:50 and 0:00 hours), the setting of time/
temperature is terminated and the room thermostat is back
to programme step 1.
You may now programme the next day if desired (for the
copy function, see chapter 9. d).
Use the button "MENU" (3) to return to the respective previ-
ous programming step if desired.
62
The home technology brand for the entire house. More information at www.sygonix.com