Sygonix TX 4 Mode D'emploi page 58

►
Menu "USER SETTINGS"
• Function G1 "PROGRAM SELECT"
Select programme memory (1, 2 or 3)
• Function G2 "PROGRAM SETTING"
Programming of the temperatures/times (P1....P7)
• Function G3 "PROGRAM SETBACK"
Temperature change for all programmes
• Function G4 "PROGRAM COPY"
Programme copying function
• Function G5 "CLOCK SETTINGS"
Switching 12h/24h mode and setting of date and time
• Function G6 "SUMMERTIME SET"
Automatic switch of summer/winter time on/off
• Function G7 "FLORT SETTINGS"
Settings for fl oor heating, external temperaturesensor required
(available as accessories)
• Function G8 "TEMP LIMITS"
Setting of the upper and lower temperature limits for program-
ming
• Function G9 "TEMP CALIBRATE"
Temperature calibration
• Function G10 "SWING SETTING"
Setting the temperature hysteresis (the temperature deviation
from the target temperature at which the consumer is activat-
ed/deactivated)
• Function G11 "ENERGY CONSUME"
Display of the duration in which the connected consumer was
activated
• Function G12 "KEYLOCK"
Activate the key lock
57