Scope Of Delivery; General Safety Instructions - Güde GE 235 TC Mode D'emploi

Kindly read this instruction manual carefully before putting
Every effort has been made to improve our products continuously. For this reason, technical data
and figures are subject to change.
A.V. 1 Reprint, even partial, requires permission. Technical changes reserved. © Güde GmbH & Co. KG - 2006
Unit
Body of steel sheet (coated with powder colour) travelling with a cooling fan, 230/400 V voltage switch
over, welding current stepless set-up, thermal protection, for electrodes 2-4 mm, 50 V connection of
welding cable (Dinse).
Accessories:
The welding site accessories include a welding shield, earthing cable with a terminal, welding cable with
the electrodes holder slag hammer and a wire brush, cooling fan and thermal protection.

Scope of Delivery

Fig. 1
Warranty
Warranty claims according to the warranty certificate attached.

General Safety Instructions

The instruction manual should be read in full prior to the initial use. In case of any doubts regarding
connection and operation of the unit, turn to the manufacturer (servicing department).
TO GUARANTEE A HIGH DEGREE OF SAFETY, THE INSTRUCTIONS BELOW SHOULD BE
OBSERVED:
CAUTION!
•
Always wear protective gloves of insulation fabric; avoid any clothing of PVC.
the unit in operation.
12
1. welding machine
2. welder´s sheet
3. casters 2x
4. wheel axis
5. transparent screen
6. tinted welder scresn
7. welder shoeld holder
8. foot
9. handle extenmsion ti
10. carrying handle
11. slag hammer-brush
12. fixinf assembly
GB