Top-Hat Rail Mounting Of The Bpt-M Touch - Bosch BPT-M Touch Manuel D'installation

26 | Transportation and installation
BPT-M Touch | Installation manual
▶
Procedure
1. Remove the device from its packaging.
2. Drill the holes
(1)
4.1: Wall installation of the BPT-M Touch
3. Insert the plugs and screw in the screws (2). The
screws should protrude 4–5 mm from the wall.
4. Fit the device onto the screws by the cut-outs (1)
and hook it on by pulling it down.
4.2.2

Top-hat rail mounting of the BPT-M Touch

Materials required
Top-hat rail clips with screws (included in the

delivery)
Top-hat rail (35 mm × 7.5 mm)

English
(2)
Bosch Power Tec GmbH