Checking The Time And Date; Set The Time And Date Manually - Bosch BPT-M Touch Manuel D'installation

58 | Commissioning
BPT-M Touch | Installation manual
7.2.2

Checking the time and date

Check the current time and date settings, and adjust
both if necessary. Use the Settings menu to adjust
the time and date.
▶
Procedure
1. On the home page of the BPT-M Touch, press
Settings.
The Settings window opens.
2. Press Time, Date.
The Time, Date window opens.
3. Check the settings for time zone, date and time.
The time and date setting applies for all connected
system components automatically. A correct time
setting is essential for the correct data display of the
diagrams in the BPT-M Touch and in the Internet
portal.
If the BPT-M Touch is connected to the Internet, the
BPT-M Touch time and date will be synchronised
automatically with the time server.
7.2.3

Set the time and date manually

▶
Procedure
1. On the home page of the BPT-M Touch, press
Settings.
The Settings window opens.
2. Press Time, Date.
The Time, Date window opens.
3. Disable Automatically synchronise time setting
with the server.
4. Skip the time and date settings by pressing
.
English
and
Bosch Power Tec GmbH