Carry Out System Setup - Bosch BPT-M Touch Manuel D'installation

English
Bosch Power Tec GmbH
5. Press Apply, to save the settings.
■
The BPT-M Touch restarts. This may take a few
minutes. The time and date are changed.
7.2.4

Carry out system setup

With the system setup, you can register all devices in
the BPT-M Touch that you want to monitor.
▶
Procedure
1. On the home page of the BPT-M Touch, press
Settings.
The Settings window opens.
2. Press Setup
The Setup window opens.
3. Select the device type.
4. Press Search.
The list of devices to be monitored is updated and
the device you have just selected appears in the
list.
You can choose to delete individual devices
registered in the BPT-M Touch, or all devices.
Individual devices: Select the device in the list and

press .
All devices: Press

5. Press Apply, to save the entry.
6. Repeat steps 3 to 5 for all device types.
■
The system setup is complete. You can view all
devices included using the Setup in the Overview
menu.
Commissioning | 59
BPT-M Touch | Installation manual