Bosch BPT-M Touch Manuel D'installation page 103

English
Bosch Power Tec GmbH
Please note the following here:
Place the split ferrite as close as possible to the

connector plug
5.3: Split ferrite opened on the CAN cable
9. Close the split ferrite.
Please note the following here:
Completely lock the housing into place when

closing
5.4: Split ferrite closed on the CAN cable
10.Fix the split ferrite on the underside using the
cable ties.
11.Connect the plug connector with the BPT-M Touch.
■
The irradiation and temperature sensor is connected.
Electrical installation | 33
BPT-M Touch | Installation manual