Specifications - Sony HT-K170 Mode D'emploi

Specifications

Amplifier section
Power output
Rated Power
(DIN 1 kHz, 8 ohms)
Output at Stereo
25 W + 25 W
mode
Reference (DIN 1 kHz, 8 ohms)
Power Output Front: 25 W / ch
Center: 25 W
Rear: 25 W / ch
Frequency TV, VIDEO, DVD 2CH,
response 5.1 CH/DVD :
10 Hz - 50 kHz +0.5/–2 dB
Inputs
Sensitivity Impedance
(weighting
network,
input level)
TV,
VIDEO,
50
DVD 2CH, 250 mV
kilohms (A, 250 mV)
5.1 CH/
DVD
Outputs
WOOFER:
Voltage: 1 V
Impedance: 1 kilohms
Muting
Full mute
General
Power 220 - 230 V AC, 50/60 Hz
requirements
Power 115 W
consumption
Dimensions 430 x 274 x 64.5 mm
Mass (Approx.) 4.6 kg
Speaker section
SS-MS215 Front, center and rear
speakers
Speaker system Full range, magnetically
shielded
Speaker units 5 cm cone type
Enclosure type Bass reflex
Rated 8 ohms
impedance
Power handling 60 watts
capacity
(Maximum input
power)
Sensitivity level 84 dB (1 W, 1m)
Frequency range 150 Hz - 20, 000 Hz
S/N
Dimensions Approx. 76 x 100 x 86 mm
(w/h/d)
including front grille
Mass
Approx. 425 g
85 dB*
*78 IHF
Additional Information
SA-WMS215 Subwoofer
System Active subwoofer,
Speaker system magnetically shielded
Speaker unit Woofer: 16 cm cone type
Enclosure type Acoustically Loaded Bass
Reflex
Continuous RMS 50 W
power output
(8 ohms, 20 -
250 Hz)
Reproduction 32 Hz - 250 Hz
frequency range
High frequency 250 Hz
cut-off
frequency
Input
LINE IN (input pin jack)
General
Power 220 - 230 V AC, 50/60 Hz
requirements
Power 45 W
consumptions
Dimensions Approx. 240 x 285 x 355
(w/h/d) mm including front
panel
Mass Approx. 8 kg
Supplied See page 4.
accessories
Design and specifications are subject to
change without notice.
Specifications indicated are measured at
230 VAC, 50Hz.
19 GB