Getting Started
Before You Use Your Amplifier
Before you use your amplifier for the first time or when
you want to clear the amplifier's memory, do the
procedure below:
?/1 (power)
1
Turn off the amplifier.
2
Press ?/1 (power) for more than 4 seconds.
"INITIAL" appears in the display and the items
including the following are reset or cleared:
• All sound field parameters are reset to their
factory settings.
• The fan control setup is reset to FAN ON.
Note
If you are using a Sony DVD player together with this home
theater system, set your DVD player to the following
configuration:
Speakers
Front
Center
Rear
Subwoofer
If you are using a non Sony DVD player, refer to the
operating instructions supplied with the DVD player for
speaker setup.
10
GB
Settings
SMALL
SMALL
SMALL
YES