Proper Use; Safety Principles; Power Connections; Servicing And Checking Requirement - Heiniger DELTA3 Mode D'emploi

Danger symbols
Warning
Indicates a potentially dangerous situation. If preventative action is not taken, death or
serious injury could result.
Caution
Indicates a potentially dangerous situation. If preventative action is not taken, death or
serious injury could result.
Information symbols
Note
Note, non-compliance with which could lead to operating malfunctions or damage.
Pictorial note
This symbol, together with its number, refers to the relevant illustration at the end of these
instructions.

2.3 Proper use

The intended use of the clipping machine is described in Section 1.2.
The following applies for safe operation:
The details given in Section 1.3 «Technical data» are the mandatory operating limits and
ratings.
Clipping other animals, and in particular dangerous animals such as beasts of prey and the
like, counts as misuse. This could lead to situations that are dangerous to life and limb.

2.4 Safety principles

2.4.1 Power connections

Only insert the plug into undamaged sockets. Defective electrical installations could lead to
an electric shock or a short-circuit. Outside sockets must be equipped with a leakage current
circuit breaker (FI). Observe the relevant national regulations.
Cleaning and servicing should only be carried out with the mains plug disconnected.
Never leave the machine unattended while the cable is still plugged in. Keep children away
from the working area, and store the machine out of their reach.

2.4.2 Servicing and checking requirement

Only operate the clipping machine if it is undamaged and in a proper condition. Any defects
to the housing or the electrical cable should be rectified by a repair or service agency.
Instruction manual DELTA3 5