Chicco Pocket Meal Mode D'emploi page 15

ed in it.
COVER
The cover of the highchair is padded, removable and washable.
If you want to remove the highchair cover follow the in-
structions in the paragraph "TIPS FOR CLEANING AND
MAINTENANCE".
WARNING: Never use the highchair without its cover.
TIPS FOR CLEANING AND MAINTENANCE
Cleaning and maintenance operations must only be carried
out by an adult.
CLEANING
Clean the cover with a soft cloth soaked in water or a neutral
detergent. To remove the highchair cover release the 4 side
buttons "E", of which there are two on each armrest (Fig.4),
and the rear button under the backrest adjustment lever.
Undo the safety harness and the fabric crotch strap and pull
them out from the cover passing them through the holes.
hat Repeat these steps in reverse order to replace the cover on
ke the highchair.
he Clean the plastic parts with a soft cloth soaked in water.
Never wash the tray in the dishwasher.
Never use abrasive detergents or solvents.
wn If the highchair comes into contact with water, dry the met-
al parts to prevent rust from forming.
ve
MAINTENANCE
ble Keep the highchair in a dry place. If necessary, lubricate the
of moving parts with dry silicone lubricant.
SAFETY HARNESS
ut-
or- The highchair has a 5-point safety harness.
me Release the safety harness straps "R" as indicated in igure 6.
rd, Place the child on the highchair fastening them in with
safety harness "R" (Fig. 7).
nd The safety harness can be adjusted to two height positions.
ble Remove the highchair cover following the instructions
2).
in the paragraph "TIPS FOR CLEANING AND MAINTE-
NANCE", move the safety harness to the desired height,
he
passing it through the holes "K" on the backrest (Fig. 3), and
es
replace the cover on the backrest. The safety harness straps
must be positioned in the holes at the same height and not
ut- at diferent heights.
WARNING: The use of the safety harness with fabric crotch
ck-
strap is essential to guarantee the safety of your child.
.
WARNING: the tray alone does not guarantee the safety of
o your child. Always use the safety harness!
ng
POSITIONING/ADJUSTING TRAY
nly
es Before using tray "L" attach rigid crotch strap "M" to the bot-
hat tom of the tray.
WARNING:
to
IMPORTANT FOR THE SAFETY OF YOUR CHILD
ed
en - Never place the tray on the highchair without having irst
ed attached the rigid crotch strap to it. Once assembled it
di- must not be removed.
The tray can be adjusted to 3 positions.
Holding the tray, pull the handles away from the tray (Fig. 10).
at- Position the tray on the frame inserting the armrest in the
guides "O" (Fig. 11).
The 3 positions in which the tray can be ixed are indicated
by the corresponding symbols on the armrests. Adjust the
tray until it is in the desired position and release the han-
dles. If the tray is not automatically locked on the armrests,
slightly move the tray until a double click is heard, indicat-
ing that the tray is locked.
WARNING: Always check that the tray is correctly fastened
to the armrests before using (Fig. 12).
WARNING: Never leave the tray itted in a position in
which the danger signs are visible on the armrests: It is NOT
safe! (see Fig. 12).
To remove the tray, pull the two handles away from the tray
and lift it.
ADJUSTING THE ANGLE OF THE BACKREST
The backrest of the highchair can be reclined in 3 positions.
To adjust the angle of the backrest push lever "G" on the
back upwards, recline the backrest to the desired position
and release the button. The backrest will automatically lock
in place and a click will be heard indicating that it is correct-
ly fastened. This operation can also be performed with the
child in the highchair but may be more diicult (Fig. 14).
CLOSING THE HIGHCHAIR
WARNING: When performing this operation, ensure that
your child, or other children, are at a safe distance. Make
sure that during these operations the movable parts of the
highchair do not come into contact with your child.
After placing the backrest in the vertical position, push the
two buttons "I" at the side of the frame and lift upwards at
the same time (Fig.15). Once the closing mechanism has
been unblocked, tilt the frame slightly forwards and hold
the top of the backrest, rotating it forwards until the high-
chair is completely closed, as in Figures 16-17.
When closed, the highchair stands on its own. The previ-
ously described steps for closing the high chair can be car-
ried out without removing the tray.
WARRANTY
The product is guaranteed against any conformity defect in
normal conditions of use as provided for by the instructions
for use. The warranty shall not therefore apply in the case
of damages caused by improper use, wear or accidental
events. For the duration of warranty on conformity defects
please refer to the speciic provisions of national laws appli-
cable in the country of purchase, where provided.
15