Publicité
10. Connect:
• Wiring harness coupler 1
11. Install:
• Fitting plate 1
• Bolts 2
NOTE:
After secure the fitting plate, lift the tiller handle
straight up and check that the cables and wires
are not stretched.
Bolt:
8.0 N • m (0.82 kgf • m, 5.9 ft • lb)
12. Install:
• Plastic tie 1
NOTE:
Fasten the battery cable and wiring harness to
the shift cable and throttle cable.
23
E
Publicité
Chapitres
