Publicité
4
5
4
7
4
8
2
1
È
2
2
2
6
1
3
2
1
2
2
1
LT
LT
2
572
5. Install:
• Throttle cable 1
• Shift cable 2
• Clips 3
• Cable clamps 4
• Cable clamp 5
NOTE:
• Install the clips facing in the directions
shown, making sure that they do not contact
the neutral switch lead 6.
• After installing the cable clamps onto the
throttle cable and shift cable, slide them
towards the cable holders 7 and insert them
into the holders.
• Pass the throttle cable and shift cable
through the grommet 8, and refit the grom-
met.
6. Install: (È Hydro tilt models)
• Cap 1
• Screw with washer (M6 × 16 mm) 2
Screw:
4.0 N • m (0.41 kgf • m, 3.0 ft • lb)
7. Install:
• Handle cover 1
• Screws with washers (M6 × 16 mm) 2
Screw:
4.0 N • m (0.41 kgf • m, 3.0 ft • lb)
145
E
Publicité
Chapitres
