Yamaha Motor 40 Manuel D'installation page 148

6
7
5
4
4
3
2
2
1
a
1
8
2
1
PREPARATION
1. Remove:
• Switch cover 1 (except F115A)
• Screws with washers (M6 × 16 mm) 2
• Handle cover 3
• Bolts 4
• Bracket 5
• Shift cable holder 6
• Throttle cable holder 7
• PTT switch 8 (hydro tilt model)
NOTE:
• Turn the throttle grip to the fully closed posi-
tion.
• Set the shift lever to the neutral position.
INSTALLATION
1. Install:
• Warning indicator harness 1
NOTE:
• Pass the warning indicator harness through
the grommet 2.
• Align the taped end a of the warning indica-
tor harness with the end of the grommet.
139
E