Yamaha Motor 40 Manuel D'installation page 180

É
É F115A
• Bracket 1
• Stud bolts 2
• Self-locking nuts 3
Stud bolt:
48.0 N • m
(4.89 kgf • m, 35.4 ft • lb)
Self-locking nut:
40.0 N • m
(4.0 kgf • m, 29.5 ft • lb)
2. Install:
• Hose guide 1
• Stay 2
• Bolts 3
• Protector 4
Bolt:
8.0 N • m (0.82 kgf • m, 5.9 ft • lb)
NOTE:
Clean the surface of the section a of the tiller
handle, and then affix the protector 4, making
sure that no air is trapped under the protector.
3. Install:
• Tiller handle assembly 1
• Self-locking nuts 2
Self-locking nut:
40.0 N • m
(4.0 kgf • m, 29.5 ft • lb)
171
E