Grommet; Cable Stopper - Yamaha Motor 40 Manuel D'installation

PREPARATION (F40D, F50F, FT50G,
F60C, FT60D)
1. Remove:
• Steering hook 1 or lock plate
2. Remove:
• Fitting plate 1
3. Remove:

• Grommet 1

• Cable stopper 2

• Rubber seal 3
INSTALLATION (F40D, F50F, FT50G,
F60C, FT60D)
1. Install:
• Tiller handle assembly 1
• Self-locking nuts 2
Self-locking nut:
40.0 N • m
(4.0 kgf • m, 29.5 ft • lb)
NOTE:
Do not kink the speedometer hose.
157
E