Matrix JF72553B Traduction De La Notice Originale page 19

source before making any adjustments, installing
or changing accessories.
CAUTION: Tool service must be preformed only
by qualified repair personnel.
Service or maintenance performed by unqualified
personnel could result in a risk
of injur y. When servicing a tool, use only identical
replacement parts. Follow
instructions in the Maintenance section of this
service manual. Use of unauthorized
parts or failure to follow Maintenance Instructions
may create a risk of electrical
shock or injury.
∙ Inspect the cord regularly and have it replaced
by an authorized repair facility if it is damaged
∙ Clean the tool housing, motor vents and blade
after each use. This will help prevent possible
electrical shorts and ensure proper cooling.
∙ Keep the tool dry, clean and free from oil and
grease.
∙ Store the tool on a safe and dry place, out of
reach of children.
∙ Do not use cleaning agents or solvents that
could attach the plastic parts of the tool.
∙ Turn the tool off immediately and do not
operate, until repaired, if tool begins to make
abnormal noise, vibrations, produces smoke or
burning odour.
∙ Keep tools sharp and clean for best and safest
performance. Follow instructions for lubricating
and changing accessories. that involve
isassembling the saw.
∙ An authorized repair centre should do any
repairs, modification, or maintenance
that involve disassembling the saw
∙ Any damage to the tool should be corrected at
an authorized repair centre.
WARNING: Repairs should be made by an
authorized repair centre. Opening this
tool could invalidate your warranty.
WARNING: RISK OF PERSONAL INJURY. Use only
accessories that are
recommended by the manufacturer for your
model. Accessories that may be suitable
for one tool, may become hazardous when used
on another tool.
19