Installing The Water Filter - Makita VC1310L Manuel D'instruction

Installing the water filter

6
1. Tank cover
2. Powder filter
3. Damper
4. Prefilter
5. Tank
6. Mounting position marking
011637
To pick up water or wet dust, remove prefilter
and damper and then use water filter.
3
1. Water filter
2. Tank
3. Mounting position marking
011630
When installing the water filter on the tank,
set it tight at the opening of the tank so that
the hook of the water filter engages the tank
opening firmly and there is no space
between the water filter and the tank.
Also, install the water filter so that the
mounting position marking can be aligned.
1
NOTE:
Models VC2510L and VC3210L have
•
no mounting position marking and no
2
need to align it.
3
Installing the paper pack
WARNING:
4
When using the paper pack, also use
•
the prefilter together that is preinstalled
on the tool. Failure to use the prefilter
5
together may cause unusual noise and
heat, resulting in a fire.
CAUTION:
Never pick up water or other liquids or
•
wet dusts when using the paper pack.
Picking up such things may cause the
paper pack breakage.
1
011638
1. Remove the rubber holder.
2. Extend the paper pack.
2
011588
8
1. Rubber holder
1
1. Paper pack
1