JB Systems DJ-KONTROL 1 Mode D'emploi page 4

ENGLISH
- Using an external soundcard: to increase the lack of channels on your internal soundcard and/or
to use a soundcard with better audio quality. Again several possibilities:
Use an extra 2channel soundcard: the master output of the controller will be routed to an
o
external, good quality, 2channel soundcard. The headphones monitoring is routed to the
internal soundcard of the PC. The JB systems "USB Audio converter" (order code: 223) is a
very good choice for the external audio card!
o Use an extra 4channel soundcard: in this case both the master and headphones outputs
are routed to the external soundcard, while the internal soundcard of your PC is not used.
See the chapter CONFIGURING VIRTUAL-DJ to learn how to setup the audio routing in the software.
JB SYSTEMS
®
OPERATION MANUAL
3/57 DJ-KONTROL 1
ENGLISH
INSTALLING VIRTUAL-DJ
Installation on your computer:
Remark: The installation procedure below is explained for Windows. However, apart from some small
differences, the procedure under MAC OS is very similar.
Insert the CD-ROM in your computer: normally the installation should start automatically. If the installation
does not start automatically, browse the CD-ROM and double click the "install_virtualdj_le_v7.0.X.exe" file
(install_virtualdj_le_v7.0.X.pkg for MAC users). File name can be slightly different) Follow the instructions on
the screen:

Click the "NEXT" button Read and accept the agreement"

Press the "INSTALL" button Press the "FINISH" button.
Now connect the DJ-KONTROL 1 controller with the supplied USB-cable.
Activating the software:
The first time you start Virtual-DJ, the software asks for a serial
number: key-in the license code that came with your product.
As soon as you have entered the license key, Virtual-DJ will
start working in LE-mode.
Software support and updates:
 !!! IMPORTANT !!! 
Virtual-DJ frequently adds new features and improvements to their software so we recommend you
to visit their website (www.virtualdj.com) and register your software: on the Virtual-DJ website
choose the DOWNLOAD-menu and go to "Software updates". Create a new user account and register
your software (with the "license code" used to unlock the software).
You can now check on a regular basis if there are new versions and download these!
Also you can consult the tutorials and participate in the user forums!
IMPORTANT: Please note that JB Systems only covers the support for the hardware (the controller).
The support of Virtual-DJ is exclusively covered by the developers at : www.virtualdj.com!
JB SYSTEMS
®
OPERATION MANUAL

Choose "Typical" installation.
4/57 DJ-KONTROL 1