Technical Data - Hilti NURON BX 3-22 Mode D'emploi

system by which the two Bluetooth-enabled products can communicate with each other over a short
distance. This product is designed to enable communication and data transfers between smart phones and
Hilti gateway. The product can submit data attributes such as location of the receiving device, runtime,
total application count, application count during interval and timestamp of transfer. Information about the
connectivity functions offered can be found in the respective Hilti application (app) or in the operating
instructions of the power tool you are using.
3.7.2 Data transmission via Bluetooth
The transmission interval can vary, depending on the available power source of the product. The signal range
may vary greatly depending on external conditions, including the receiving device used. The Bluetooth
range may be significantly weaker inside closed rooms and through metallic barriers (e g. walls, shelving
units, cases, etc.). Depending on ambient conditions, several transmission intervals may be required before
the tool is detected.
If the tool is not detected, check the following:
• Is the distance to the mobile terminal device too great?
→ Reduce the distance between the mobile terminal device and the tool
3.7.3 Installing and setting up the app
In order to be able to use the connectivity functions, you first have to install the respective Hilti app.
(1.) Download the app from an appropriate app store.
You will require a user account on the corresponding app store to do this.
(2.) After starting the app for the first time, please either log in with your account or register.
(3.) The display of your mobile terminal device will show you all the subsequent steps required to connect
the power tool to the mobile terminal device.
First, fully complete the tutorial for the app. This will give you a better overview of how the connection
is made and how the connectivity functions are used.
3.8 Deep discharge protection
The product has a hibernation mode to protect the Li-ion battery from deep discharge. This prevents deep
discharge of the battery.
• Deep discharge protection is activated after 360 minutes.
• To deactivate deep discharge protection, remove and then reinsert the battery.
3.9 Items supplied
fastening tool, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4

Technical data

Weight without battery
Nail length (collated nails)
Nail length (single nails)
Nail diameter
Magazine capacity
*2268214*
®
BX 3-22
3.5 kg
(7.7 lb)
14 mm ... 30 mm
(0.6 in ... 1.2 in)
•/•
3 mm
(0.1 in)
30 nails
2268214
BX 3-L-22
3.5 kg
(7.7 lb)
14 mm ... 36 mm
(0.6 in ... 1.4 in)
•/•
2.75 mm ... 3.0 mm
(0.108 in ... 0.12 in)
30 nails
®
BX 3-ME-22
3.4 kg
(7.5 lb)
14 mm ... 24 mm
(0.6 in ... 0.9 in)
30 mm ... 36 mm
(1.2 in ... 1.4 in)
3 mm
(0.1 in)
20 nails
English 9