Manufacturer's Warranty; Further Information; Notice D'utilisation Originale; Indications Relatives À La Documentation - Hilti NURON BX 3-22 Mode D'emploi

11

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
12 FCC statement (applicable in US) / IC statement (applicable in Canada)
This product has been tested and found to comply with the limits for a class B digital product, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. These products generate, use and can radiate high frequencies
and, if not installed and used in accordance with the instructions, may cause interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this product does
cause harmful interference to radio or television reception, which can be determined by turning the product
off and on, the user is encouraged to try to correct the interference by taking the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product to a power outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced TV/radio technician for assistance.
This device is in compliance with paragraph 15 of the FCC Regulations RSS-210 of the ISED Regulations.
Operation is subject to the following two conditions:
• This product shall cause no harmful interference.
• This product must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by Hilti may restrict the user's authorization to
operate the product.
13

Further information

For more information on operation,
qr.hilti.com/manual?id=2268214
This link is also to be found at the end of the documentation, in the form of a QR code.

Notice d'utilisation originale

1 Indications relatives à la documentation
1.1 À propos de cette documentation
• Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement
requise pour assurer la sécurité du travail et un maniement sans perturbations.
• Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que
celles figurant sur le produit.
• Toujours conserver le mode d'emploi à proximité du produit et uniquement le transmettre à des tiers
avec ce mode d'emploi.
1.2

Explication des symboles

1.2.1

Avertissements

Les avertissements attirent l'attention sur des dangers liés à l'utilisation du produit.
signalisation suivants sont utilisés :
DANGER
DANGER !
▶ Pour un danger imminent qui peut entraîner de graves blessures corporelles ou la mort.
*2268214*
technology,
2268214
environment and recycling, follow this link:
Les termes de
Français 17