Burner Grates; Sealed Burners; Flame Characteristics - Gaggenau CG 280 211 CA Manuel D'utilisation

en-us Familiarizing yourself with your appliance
4.4 Burner grates
Place the burner grates correctly onto the cookop. Never
operate the cooktop without the burner grates in place.
For the correct position of the burner grates, refer to the
¡
appliance overview image → Page 10 .
Place the cookware on the burner grates. Never place
¡
cookware directly onto the burners.
Always remove burner grates carefully. When you move
¡
one burner grate, the burner grates next to it may also
move.
4.6 Flame characteristics
The color of the flame tells you if the gas supply is properly adjusted.
Note: Allow the appliance to operate for 4 to 5 minutes before evaluating the flame. Some yellow streaking is normal dur-
ing the initial startup.
Flame Image
Completely or mostly
yellow
Yellow tips on outer
cone
Soft blue
12
4.5 Sealed burners
Your cooktop has sealed gas burners. There are no
burner parts under the cooktop to clean, disassemble or
adjust.
Your cooktop has four different burner sizes; small,
medium, large and dual-flame. Match every burner cap
with the corresponding burner base.
Measure
Verify that the regulator is set for the correct fuel. Retest af-
ter adjustment.
Normal for LP gas
Normal for natural gas