Product Data Sheet - Whirlpool Estate TS22AQXGN01 Guide D'utilisation Et D'entretien

Product Data Sheet

Water Filtration System Model WF-NL300
This product has been tested and certified by NSF International under ANSI/NSF Standard 42 for
Chlorine reduction (Class I), Taste and Odor reduction and to Standard 53 for Lead reduction.
¨
Specifications:
General Average
Performance Influent
Chlorine 2.0 mg/L
Contaminant U.S. EPA
Reduction MCL
*
Performance
0.015 ppm 0.16 mg/L
Lead @ pH 6.5
Lead @ pH 8.5 0.015 ppm 0.14 mg/L
1
Test requirement is 0.15 mg/L ± 10%
*
These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.
®
NSF is a registered trademark of NSF International
28
Lead and Taste/Odor/Chlorine reduction (Class I) capacity
300 Gallons (1136 Liters)
Service Flow Rate 0.5 GPM (1.89 L/min) @ 60 psi
Maximum
Effluent
N/A
Average Maximum
Influent Effluent
1
0.007 mg/L
1
0.012 mg/L
Average Minimum %
Effluent Reduction
0.1 mg/L N/A
Average Minimum %
Effluent Reduction
0.004 mg/L 95%
0.008 mg/L 91%
Application Guidelines/
Water Supply Parameters
Water Supply
Water Pressure
Water Temperature
• It is essential that operational, maintenance,
and filter replacement requirements be carried
out for this product to perform as advertised.
• Change cartridges at least every 6-9 months.
Use replacement cartridge part #NL300 or
#4392857. Suggested retail price of $29.95
U.S.A./$39.95 Canada.
• The product is for cold water use only.
• Do not use with water that is microbiologically
unsafe or of unknown quality without adequate
disinfection before or after the system.
Average % NSF Test
Reduction Requirement
93%
minimum 75% reduction
(Class I)
Average % NSF Test Requirement
Reduction
97% maximum effluent 0.015 mg/L
94% maximum effluent 0.015 mg/L
City or Well
30-120 psi (207-827 kPa)
33 ˚ -100 ˚ F ( 0.6 ˚ -37.8 ˚ C)