Whirlpool Estate TS22AQXGN01 Guide D'utilisation Et D'entretien page 19

Réfrigérateur côte à côte
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Light behind control panel:
1. Unplug refrigerator or disconnect power.
2. Reach behind the Control Panel and remove the bulb.
3. Replace the bulb with a 40-watt appliance bulb.
4. Plug in refrigerator or reconnect power.
Crisper light (on some models):
1. Unplug refrigerator or disconnect power.
2. Remove the light shield by grasping the top center of
the shield and pulling forward while turning it slightly to
one side.
3. Replace the bulb with a 40-watt appliance bulb.
4. Replace the light shield by grasping the top center of
the shield and inserting the tabs on one end into the
slotted holes in the refrigerator liner. Then, carefully
bend the shield at the center to insert the tabs on the
other end.
5. Plug in refrigerator or reconnect power.
NOTE: To clean the light shield, wash it with warm water
and a liquid detergent. Rinse and dry the shield well.
Freezer Light Bulbs
Light below the ice bin:
1. Unplug refrigerator or disconnect power.
2. Push in the sides of the light shield and pull down until
the shield snaps free.
3. Replace the bulb with a 40-watt appliance bulb.
4. Replace the light shield.
5. Plug in refrigerator or reconnect power.
Upper freezer light (on some models):
1. Unplug refrigerator or disconnect power.
2. Remove the light shield by grasping the top center of
the shield and pulling forward while turning it slightly to
one side.
3. Replace the bulb with a 40-watt appliance bulb.
4. Replace the light shield by grasping the top center of
the shield and inserting the tabs on one end into the
slotted holes in the freezer liner. Then, carefully bend
the shield at the center to insert the tabs on the other
end.
5. Plug in refrigerator or reconnect power.
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Estate ts22aqxgn02Estate ts22aqxgw01Estate ts22aqxgw02

Table des Matières