Slave Mode - MC Crypt LumiSTAGE 4/146-10 Notice D'emploi

7. Commissioning
Colour overview:
Colour
C00 white
C01 red
C02 green
C03 blue
C04 yellow
C05 pink
C06 turquoise
C07 light green
C08 orange
C09 red/blue/red/blue

Slave mode

• Press the button MODE (1) until the display (4) shows "SLA". "SLA" means that the device is in slave mode.
• In this operating mode, each of the four spots of the effect light covers 3 DMX channels for the respective intensity
of the colours red, green and blue.
• Spot 1 thus reacts to channels 001-003, spot 2 to channels 004-006, spot 3 to channels 007-009 and spot 4 to
channels 010-012.
• In this operating mode, the device receives the 12-channel DMX data from a connected master device in
automatic, sound-to-light or fixed-colour-setting mode.
• Once a DMX signal is received from the master device, an LED flashes at the right side below the "S" in the
display (4).
C10 green/blue/green/blue
C11 pink/turquoise/pink/turquoise
C12 light green/orange/light green/orange
C13 red/green/red/green
C14 blue/yellow/blue/yellow
C15 violet/light green/violet/light green
C16 turquoise/light green/turquoise/light green
C17 green/orange/green/orange
C18 red/green/blue/yellow
C19 pink/turquoise/light green/orange
C20 off
35