Specifications; Main Unit - Sony MHC-ECL99BT Mode D'emploi

ˎ BLUETOOTH devices connected with this
system must comply with the BLUETOOTH
specification prescribed by the Bluetooth
SIG, Inc., and must be certified to comply.
However, even when a device complies
with the BLUETOOTH specification, there
may be cases where the characteristics or
specifications of the BLUETOOTH device
make it impossible to connect, or may
result in different control methods, display
or operation.
ˎ Noise may occur or the audio may
cut off depending on the BLUETOOTH
device connected with this system,
the communications environment, or
surrounding conditions.
36
GB

Specifications

Main unit

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(The United States model only)
With 3 ohms loads, both channels
driven, from 120  10,000 Hz; rated
30 watts per channel minimum
RMS power, with no more than
0.7% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
MHC-ECL99BT
U.S. model:
Front speaker:
Output power (reference):
235 W + 235 W (per channel at
3 ohms, 1 kHz)
Subwoofer:
Output power (reference):
230 W (at 3 ohms, 100 Hz)
Other models:
Front speaker:
Power output (rated):
60 W + 60 W (at 3 ohms, 1 kHz, 1%
THD)
Output power (reference):
235 W + 235 W (per channel at
3 ohms, 1 kHz)
Subwoofer:
Output power (reference):
230 W (at 3 ohms, 100 Hz)
MHC-ECL77BT
U.S. model:
Output power (reference):
235 W + 235 W (per channel at
3 ohms, 1 kHz)
Brazilian model:
Output power (reference):
320 W (160 W per channel, at
3 ohms, 1 kHz, 10% THD)
Other models:
Power output (rated):
60 W + 60 W (at 3 ohms, 1 kHz, 1%
THD)
Output power (reference):
235 W + 235 W (per channel at
3 ohms, 1 kHz)