Pentair Claris ULTRA 170 Guide D'installation Et D'utilisation page 3

EVERPURE CLARIS ULTRA filter cartridges
All information in this Everpure Claris ULTRA guide relates to the use of Everpure Claris ULTRA filter cartridges in
combination with Everpure Claris filter heads.
The installation & operation guide attached to the Everpure Claris filter heads is also suitable for use with Everpure
Claris ULTRA filter cartridges, unless specific information is given for Everpure Claris ULTRA in this guide.
1. Application
The Everpure Claris ULTRA filter cartridges are typically used to feed the following appliances:
• Coffee and espresso machines
• Drinks vending machines
• Ice machines
The Everpure Claris ULTRA filter systems fits into all Everpure Claris filter heads.
2. Function
Everpure Claris ULTRA filter cartridges use a new water-conditioning method to optimize the quality of hot drinks and
ice cubes and to protect machine parts from mineral deposits and for water-related aggression.
The incorporated 5 µm membrane carbon block reduces undesirable cloudiness, organic impurities, taste and odour
and chlorine residue from the filtrate.
3. Flushing during installation and replacement of ULTRA ilter cartridges
Replaces 5.1.1,(5) and 5.1.2 (4) in the Everpure Claris installation & operation guide.
Insert the Everpure Claris ULTRA filter cartridge into the filter head by rotation and screw clockwise until it stops (see
page 3, item 8). This vents the system and flushes the filter cartridge (type ULTRA 250 and 500 > 10 litres / 3 US gal;
1000 and 1500 > 20 litres / 6 US-gal; 2000 > 30 litres / 8 US-gal).
4. Settings / Capacities
Replaces the table in chapter 10 of the Everpure Claris guide.
The recommended settings and capacities for Everpure Claris ULTRA are mentioned in the tables on page 11.
If the actual hardness degree isn't listed in the tables the recommended settings and capacities of the next listed higher
hardness degree is valid.
Please note: the hardness degrees listed in the capacity tables relate to carbonate hardness (alkalinity).
5. Technical data
Dimensions
Height, ilter system
Height, ilter cartridge
Diameter of ilter cartridges
Min. distance from ground
Weight, ilter cartridge
Operating data
Max. working pressure
Water temperature / ambient temperature
6. Order information
Description
Filter cartridges
Single ilter head 3/8" thread, in left/out right
Single ilter head 3/8" - QCF, in left/out right
Single ilter head 1/4" - QCF, in left/out right
Disclaimer
Information contained in this document is believed to be accurate at the time of publication,
but does not constitute a contractual offer. The right is reserved to alter specifications without prior notice. Illustrations
and tabulated data are for guidance only. Everpure does not assume liability for any damages, including subsequent
damages, that may result from incorrect installation or usage of the products.
Everpure does not assume liability for damage caused by using parts from other manufacturers.
250 500
[mm] 365 475
[mm] 315 425
[mm] 95 95
[mm] 40 40
[kg] 1.3 1.8
250 500
4339-80 4339-81
3
1000 1500
410 525
360 475
136 136
40 40
3.2 4.3
2 - 8 bar (29 - 116 psi)
4° - 30° C (39° F - 86° F)
1000 1500
4339-82 4339-83
4339-21
4339-23
4339-25
2000
525
475
175
40
6.5
2000
4339-84