FujiFilm instax Square SQ 20 Guide D'installation page 41

INSTAX SQUARE FILM AND PRINT CARE
See FUJIFILM Instant Film "instax SQUARE" for film use instructions. Follow all instructions for safe and proper use.
1 Keep the film in a cool place. Do not leave the film in a place where the temperature is extremely high (e.g., in a closed car)
for many hours.
2 Do not puncture, tear, or cut INSTAX SQUARE film. If film becomes damaged, do not use.
3 When you load a film pack, use the film as soon as possible.
4 If the film has been kept in a place where the temperature is extremely high or low, bring it to room temperature before
starting to print pictures.
5 Be sure to use the film before the expiration or "Use Before" date.
6 Avoid airport checked luggage inspection and other strong X-ray illumination. The effect of fogging, etc. may appear on
unused film. We recommend that you carry the camera and/or the film onto the aircraft as carry-on luggage. (Check with
each airport for more information.)
7 Avoid strong light, and keep the developed prints in a cool and dry place.
Cautions on handling the fi lm and prints
For details, refer to the instructions and warnings on FUJIFILM Instant Film "instax SQUARE".
Information for traceability in Europe
Manufacturer: FUJIFILM Corporation
Address, City: 7-3, Akasaka 9-Chome,
Minato-ku, Tokyo
Country: JAPAN
Authorized representative in Europe:
FUJIFILM EUROPE GMBH
Address, City: Dusseldorf Heesenstrasse 31,
40549
Country: Germany
EN
41