Bushnell Core Mode D'emploi page 2

Quick Start Guide (119936C/119938C/119975C/119977C)
To get Started using your Bushnell Trail Camera:
1. Install 6 AA batteries (lithium* or alkaline) and SD card (up to 32GB max.)
*lithium batteries are recommended
2. At the location you will place the camera, power it on.
3. Mount the camera using the tree strap.
4. Your camera is now ready to use at its default settings: photo mode, 10 sec interval between
photos, 8MP resolutions, "Hi" LED Power.
5. The default settings can be changed to your preferences (for example, if you would rather
capture videos, or photos at a different resolution, spaced further apart) using the display on
the camera?
(see full manual at www.bushnell.com
Customer Service: 800-423-3537
www.bushnell.com
English / Anglais / Inglés / Inglese / Engels
For full instruction manual go to:
for more details)
www.bushnell.com
3