Bushnell Core Mode D'emploi page 3

Masquer les pouces Voir aussi pour Core:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

IMPORTANT NOTE
Congratulations on your purchase of one of the best trail cameras on the market! Bushnell is very proud
of this camera and we are sure you will be pleased with it as well. We appreciate your business and
want to earn your trust. Please refer to the notes below and the instructions in this manual to ensure
that you are completely satisfied with this product.
If your Bushnell Core Trail Camera does not seem to be functioning properly or if you are having
photo/video quality issues, please check the Troubleshooting/FAQ section on pages 21-24.
Problems are often due to something simple that was overlooked, or require only changing one setting
to solve.
If your problem continues after trying the solutions in the Troubleshooting/FAQ section, please call
Bushnell Customer Service at (800) 423-3537. In Canada, call (800) 361-5702.
Do not mix old and new batteries
Do not mix battery types-use ALL lithium or ALL alkaline.
Bushnell recommends using SanDisk® class 6 or faster SDHC Cards (up to 32GB capacity) in your Core
Trail Camera.
INTRODUCTION
About the Core Trail Camera
The Bushnell Core Trail Camera is a digital scouting camera. It can be triggered by any movement of
game in a location, detected by a highly sensitive Passive Infra-Red (PIR) motion sensor, and then take
high quality pictures (up to24MP or 30MP still photos), or video clips.
The Core Trail Camera consumes very little power (less than 0.08 mA) in a stand-by (surveillance) state.
This means it can deliver up to six months stand-by operation time when the device is powered by the
full capacity of AA alkaline batteries, and up to twelve months utilizing lithium AA batteries. Once
motion in the monitored area is detected, the digital camera unit will be triggered at once (typically
within half a second) and then automatically take photos or videos according to previously programmed
settings. The Core Trail Camera is equipped with built-in infrared LEDs that function as a flash, so that it
delivers clear photos or videos (in black & white) even in the dark, and it can take color photos or videos
under sufficient daylight. The Core Trail Camera is designed for outdoor use and is resistant against
water and snow.
Your trail camera is one of the latest generation of Bushnell Core Trail Camera.
4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Core ds119938c119936c119975c119977c

Table des Matières