Bushnell Core Mode D'emploi page 10

Fig. 4 Selecting Parameter Settings
Press Menu
(4A)
Press Down
(4B)
Press OK
EXAMPLES-Changing the Settings of Some Common Parameters
Following this page, you will find tables listing all of the parameters found in the SETUP Menu, along
with their possible settings (or range of settings), and a detailed description of what the parameter
controls and what the settings do. If you read the previous section detailing how to select parameters
and change their settings, you should be able to dive right in, find the parameter(s) you want, and setup
the camera to suit your preferences. But maybe you'd rather walk through an example or two first:
To change any parameter's setting, always start with the power switch in the SETUP position. After the
LCD comes on, press the MENU key.
The first parameter you will see when you enter the SETUP Menu is "Set Clock". As the Time Stamp
feature is "On" by default, the camera will normally imprint the date and time on each photo or video,
based on your settings here. Press ENTER and use the UP/DOWN keys to set the hour (24-hr format,
"00"=midnight, "12"=noon), then press the RIGHT key move to the minute field and set it (again using
UP/DOWN). Press RIGHT to move to the lower row and set the year, month and date using the same
method. When finished, press the ENTER key to confirm the new time and date settings you made.
Now press the RIGHT key one time to move to another parameter in the Menu. The parameter you will
see is "Mode". To change it from its default setting of "Camera" (still photos) to "Video" (shoot video
11