Using The Machine - Stiga A 180 E Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35

USING THE MACHINE

7. USING THE MACHINE
WARNING!
that of others:
1) Do not use the machine without reading
the instructions carefully. Become ac-
quainted with the controls and the proper
use of the machine. Learn how to stop the
engine quickly.
2) Only use the machine for the purpose for
which it was designed, that is for "felling,
bucking and delimbing trees with dimensions
suitable for the length of the bar" or wooden
objects with the same characteristics. Any
other use, such as using accessories not
specified in this manual, may be hazardous
and also damage the machine. Examples of
improper use may include, but are not lim-
ited to:
– trimming hedges;
– intaglio carving;
– sectioning pallets, crates and various
packing materials;
– sectioning furniture or other materials
with nails, screws or other metal compo-
nents;
– butchering meat;
– using the machine to lift, move or split
objects;
– using the machine while fastened to fixed
supports.
3) Keep in mind that the operator or user is re-
sponsible for accidents or hazards oc-
curring to other people or their property.
4) Always wear suitable clothing when using
the machine. Your dealer can provide you
with all the information on the most suit-
able accident-prevention devices to guar-
antee your safety. Wear anti-vibration
gloves. All the above-mentioned precau-
tions do not however guarantee the pre-
vention of certain risks – i.e. Raynaud's
phenomenon or Carpal tunnel syndrome.
For operators who use this machine for
prolonged periods, it is therefore recom-
mended to have periodic check-ups on the
hands and fingers.
If any of the above mentioned symptoms
should appear, please contact a physician
immediately.
5) Mow only in daylight or good artificial light.
6) Take utmost care when working near metal
fences
7) Keep the chain away from the electric ca-
ble. Use the cable clamp to prevent the ex-
tension lead from disconnecting acciden-
tally. Make sure it is connected to the
socket without being forced. Never touch a
live electric cable if it is poorly insulated. If
For personal safety and
the extension lead gets damaged during
use, do not touch the cable and unplug the
extension lead immediately.
8) Take care not to hit the bar hard against for-
eign objects or flying debris caused by the
movement of the chain.
9) Stop the engine and unplug the machine
from the mains:
– whenever you leave the machine unat-
tended;
– before cleaning, checking or servicing
the machine;
– after striking a foreign object. Inspect
the machine for any damage and make
repairs before restarting it again;
– if the machine begins to abnormally vi-
brate (Immediate look for the cause of
the vibrations and take for necessary
controls at a Specialised Centre).
– when the machine is not in use.
IMPORTANT
correctly used electric chain-saw may disturb oth-
ers and have a serious impact on the environment.
To respect people and the environment:
– Avoid using the machine in environments or at
times of the day when it may disturb others.
– Scrupulously comply with local regulations and
provisions for the disposal of waste materials
after sawing.
– Scrupulously comply with local regulations and
provisions for the disposal of oils, damaged parts
or any elements which have a strong impact on
the environment.
– A certain amount of chain lubricating oil is rele-
ased into the environment when the machine is
running, so only use biodegradable oils made
specifically for this use.
– To avoid the risk of fire, do not leave the machi-
ne with the engine hot on leaves or dry grass.
WARNING!
to use the machine for felling and delimbing.
EN
Always remember that an in-
It takes specific training
9

Publicité

Table des Matières
loading

Table des Matières