Guarantee, Warranty, Liability - Storch ProCut top Mode D'emploi

Guarantee, warranty, liability

We guarantee the flawless operation of the device under
the condition that it is duly operated and maintained. The
warranty expires 1 year after the date of purchase (billing
date). It is restricted to material and manufacturing de-
fects. Additional claims and replacement of wear and tear
parts (e.g. cutting wire) are excluded.
Any variations from the intended use will result in expira-
tion of the warranty.
The device must be deployed and operated in accordance
with the conditions specified in this manual. We shall not
assume any liability or warranty for damages resulting from
non-compliance or improper handling.
Device description / ProCut top front view
19 13
18
17
16
15
14
13
12
11
Translation of the original instruction
12
1
2
3
4
5
6
7
8
9
10
Personnel qualification
The device may only be assembled, commissioned, oper-
ated, maintained and cleaned by authorised, qualified per-
sonnel.
Spare parts, consumables
All of the device components are available from STORCH
and its distribution partners. We recommend that you keep
sufficient quantities of the original cutting wire (item No.
570047) and fine wire fuses (item No. 570004) in stock.
1 Base panel
2 Transport handle
3 Mitre aid
4 Scale for angled cuts, right
5 Locking screw for bearing rail, right
6 Board support bearing rail, left, foldable
7 Board support bearing rail, left, rear
8 Bearing rail, right
9 Slider for reproducible angle cuts
10 Freestanding support
11 Stand
12 Locking screw for cutting bow
13 Slider for reproducible section cut-outs
14 Foldable slider for reproducible longitudinal cuts
15 Bearing rail, left
16 Scale for angled cuts, left
17 Cutting bow
18 On/Off switch: pos. 1 = base unit, pos. 0 = Off,
pos. 2 = corner cutter
19 Reproducible slider for mitre cuts
52