Selecting A Programme; Switching The Heater On And Off; Cleaning And Maintenance; Cleaning The Appliance - ULTIMATE SPEED UAMM 12 A1 Mode D'emploi

__EAI279745_Automassagematte_B6.book Seite 7 Mittwoch, 6. Juli 2016 7:45 19
2. To switch the appliance off before the
30 minutes has expired, press the OFF
button 5.
6.2

Selecting a programme

There are 8 programmes (MODE 1 – 8)
available altogether. The programmes vary
in their intensity, the area massaged and the
massage rhythm.
1. Press the MODE programme button 6.
2. The illumination of the remote control
will be activated.
3. Press the MODE programme button 6
again.
The appliance switches to the next pro-
gramme and the motors start to work.
The selected programme number is
shown in the LCD display 4.
6.3 Switching the heater on
and off
1. Press the heat button 8.
The illumination of the remote control
will be activated.
2. Switch the heater on by pressing the
heat button 8 again.
Heat will now be produced from inside
the massage mat.
3. To switch the heater off, press the heat
button 8 again.
7. Cleaning and main-
tenance
7.1

Cleaning the appliance

To ensure your product gives you lasting ser-
vice, you should clean it regularly.
!
DANGER To avoid the dan-
ger of an electric shock or
damage:
Always disconnect the power supply be-
fore cleaning.
Never immerse the machine in water.
Never allow water or cleaning agent to
run into the machine.
CAUTION:
Never use caustic or abrasive cleaning
agents, as they could damage the parts.
1. Unplug the power plug 12 from the
power socket 11.
2. Clean the massage mat 1 with a
clothes brush.
3. If badly soiled, clean the massage
mat 1 as well as the remote control 10
with a damp cloth. You could also use
a little mild washing-up liquid.
4. Wipe off with clean water.
5. Do not use the appliance again until it
is fully dry.
7.2 Changing the fuse in
the car lead
There is a fuse in the car lead 13 to protect
the car's electrical system. If there is no pow-
er supply and the car lead 13 stops work-
ing, you should check and, if applicable,
change this fuse.
1. Unscrew the cap on the top of the car
lead 13.
2. Remove the fuse.
3. Insert a new type F3AL 250V fuse.
4. Screw the car lead 13 together again.
7
GB