Soehnle Body Balance Shape F4 Mode D'emploi page 13

Entry of personal data
It is necessary to enter perso-
nal data for each correspondi-
ng person and to step on the
scale with bare feet immedia-
tely after data entry to ensure
correct functionality of this
body analysis scale.
1. Place scale on a table for
programming.
2. Start data entry (push
key for 1 second).
3. Memory location
(P1 ... P8) select
( = minus, = plus) and
confirm ( ).
4. Enter your height
( = minus, = plus) and
confirm ( ).
5. Enter your age ( = minus,
= plus) and confirm
.
6. Select sex using /
=male, =female)
and confirm ( ).
7. Set the value of your
individual activity level
according to the table on
the next page ( =minus,
=plus).
Activity level
Persons with average activity level,
1-3 with light work while sitting or stan-
ding
Athletes and persons with
4
a lot of physical activity
Competitive athlete, worker
5
with heavy physical activity
Note: For this model, the selection of the activity levels 1-3
does not result in different measurement results.
Push
hold for 3 seconds
until "0.0" appears
on the screen.
8. Following this, immediately
place the body analysis
scale on the floor, wait
until the screen displays
"0.0" and then step on the
scale with bare feet.
The initial measurement is
indispensable and serves
to store the data and to
automatically recognize
persons at a later time.
If no person steps on the
scale, data entry must be
repeated.
The first body analysis is
performed after a person
. steps on the scale.
This scale is equipped with
( a Time-Out mode.
It will automatically
switch off after approx.
40 seconds if no keys are
pressed.
Data must be entered
again after battery change.
Stand or move for
max. 2 hours/day
Min. 5 h/week of
intensive training
Min.10 h/week of
intensive training
2.
key and
3.
4.
5.
6.
7.
8.
EN
13