Operation - Dometic ROLLERBLIND PRECISION Instructions De Montage Et De Service

Rollerblind Precision
6.2 Fitting the guide wire versions
➤ Proceed as shown:
– BR leaflet: fig. 6 to fig. 0
– MP leaflet: fig. 5 to fig. 9
– CA leaflet: fig. 5 to fig. 9
➤ Fix the hold down according the chosen option:
– Dome mounted hold down (A) (BR leaflet: fig. 8, MP leaflet: fig. 7,
CA leaflet: fig. 7)
– Flush mounted hold down (B) (BR leaflet: fig. 9, MP leaflet: fig. 8,
CA leaflet: fig. 8)
– Extended guide wire hold down (C) (BR leaflet: fig. 0, MP leaflet: fig. 9,
CA leaflet: fig. 9)
6.3 Fitting the side track versions
➤ Proceed as shown:
– BR leaflet: fig. a to fig. b
– MP leaflet: fig. 0 to fig. a
– CA leaflet: fig. 0 to fig. a
7

Operation

!
CAUTION! Risk of injury
Only for boats and yachts: If the blind is in front of an open window,
then the blind should be stowed when driving at more than 10 knots or
in a sea state of more than moderate, as this can cause damage to the
blind. Parts that come loose may injure persons in the vicinity.
➤ Pull the blind by the hem bar to the desired position.
EN
Operation
7