Technical Description; Installation; Fitting The Blind - Dometic ROLLERBLIND PRECISION Instructions De Montage Et De Service

Technical description

5 Technical description
Blinds are available in three mounting types in different sizes:
• BR: Bracket mounted (available in size BR38)
• MP: Mounting profile mounted (available in size MP38)
• CA: Cassette mounted (available in sizes C1 and C2)
There are three different types of fabric restraints:
• FH: Free hanging
• GW: Guide wired (available as Dome (A), Flush Mount (B) and Extended (C), see
GW versions in fig. 1)
• ST: Side tracked (available with ST7, ST8, ST10 and ST11, see ST versions in
fig. 1)
The number on the product label indicating the blind type is located:
• For BR versions on the tube under the fabric
• For MP versions on the back of the mounting profile
• For CA versions on the back of the cassette
6

Installation

6.1

Fitting the blind

A
NOTICE! Risk of damage
Consider using two people to install the product if the blind is large or
the installation location is difficult to reach alone.
➤ Proceed as shown:
– BR leaflet: fig. 2 to fig. 4
– MP leaflet: fig. 2 to fig. 3
– CA leaflet: fig. 2 to fig. 3
➤ Proceed as shown to remove the blinds:
– BR leaflet: fig. 5
– MP leaflet: fig. 4
– CA leaflet: fig. 4
6
Rollerblind Precision
EN