Operation - Dometic ROLLER Serie Instructions De Montage Et De Service

Rollerblind PrecisionRise
➤ Proceed as shown:
– MP leaflet: fig. 2 to fig. 3
– CA leaflet: fig. 2 to fig. 3
➤ Proceed as shown to remove the blinds:
– MP leaflet: fig. 4
– CA leaflet: fig. 4
6.2 Fitting the guide wire versions
➤ Proceed as shown:
– MP leaflet: fig. 5 to fig. 7
– CA leaflet: fig. 5 to fig. 7
➤ Fix the hold down according to the chosen option:
– Dome mounted hold down (A) (MP leaflet: fig. 8 to fig. c, CA leaflet:
fig. 8 to fig. c)
– Flush mounted hold down (B) (MP leaflet: fig. d to fig. o, CA leaflet:
fig. d to fig. o)
– Low profile hold down (B) (MP leaflet: fig. p to fig. v, CA leaflet: fig. p to
fig. v)
– Extended guide wire hold down (C) (MP leaflet: fig. w to fig. B, CA leaflet:
fig. w to fig. B)
7

Operation

7.1 Deploying the blind
➤ Pull the blind by the hem bar to the desired position.
7.2 Stowing the blind
➤ Pull the hem bar down and release it.
EN
Operation
7