Clean the machine regularly.
Defective safety devices must be
replaced immediately.
Repair and maintenance work on the
electrical system may only be carried
out by a qualified electrician.
9. Trouble shooting
Motor doesn't start
*No electricity-
check mains and fuse.
*Defective switch, motor or cord-
consult an electrician.
Chisel clogged with chips
*Clearance chisel to bit not enough-
set bit 1,5 to 4mm below chisel.
*chips cannot clear the chisel-
observe chisel slot and working order.
Burned Wood
*Feed too slow-
increase feedrate.
*Worn chisel or bit-
sharpen chisel and bit.
10. Available accessories
Stock number 708579
50mm riser block
Stock number 6285526
6,35 mm chisel and bit
Stock number 6285527
8 mm chisel and bit
Stock number 6285528
9,5 mm chisel and bit
Stock number 6285529
12,7 mm chisel and bit