Installation Into The Radio Slot - Renkforce CD-7630 Notice D'emploi

Installation into the radio slot

• Remove the front control panel.
• Carefully remove the plastic frame from the front of the device by bending it slightly outwards and pulling it off
the device.
1
1
2
• Remove the two safety screws of the CD drive (ill. 1, pos. 1).
• Unlock the installation frame using the two unlocking keys (ill. 1, pos. 2).
• Remove the installation frame by pulling it towards the back of the device (ill. 1, pos. 3).
• Insert the installation frame into the radio slot (ill. 2).
• Bend down some clips of the installation frame until the frame is securely fastened in the slot (ill. 3).
• When you have set up all the electrical connections (see „Electrical connection"), insert the device into the
installation frame until it snaps in (ill. 4).
• Re-attach the plastic frame of the front control panel to the device.

Keep the two unlocking keys. You will need them for future removal of the device.
2
3
182mm
3
53mm
4
45