Dmx Channels - Monacor International IMG Stage Line LSX-40G Mode D'emploi

8.1 DMX channels

DMX Value Function
Channel 1: Operating mode
000 – 063 laser turned off
064 – 127 automatic run
128 – 191 music control switched on
192 – 255 DMX control via the other channels
Channel 2: Laser pattern
000 – 255 32 patterns
Channel 3: Size of the laser patterns, automatic zooming
size 100 % → 5 %
000 – 127
automatic zooming from max. to smaller size,
128 – 169
slow → fast
automatic zooming from min. to larger size,
170 – 209
slow → fast
autom. zooming to larger and smaller sizes,
210 – 255
slow → fast
Channel 4: Rotation around the Y axis
rotation 0° → 359°
000 – 127
permanent clockwise rotation, slow → fast
128 – 191
perm. counter-clockwise rotation, slow → fast
192 – 255
Channel 5: Rotation around the X axis
rotation 0° → 359°
000 – 127
permanent clockwise rotation, slow → fast
128 – 191
perm. counter-clockwise rotation, slow → fast
192 – 255
Channel 6: Rotation around the Z axis
rotation 0° → 359°
000 – 127
perm. counter-clockwise rotation, slow → fast
128 – 191
permanent clockwise rotation, slow → fast
192 – 255
Channel 7: Movement in the X axis
000 – 127 static displacement: 128 positions
permanent movement, start to the left,
128 – 191
slow → fast
permanent movement, start to the right,
192 – 255
slow → fast
Channel 8: Movement in the Y axis
000 – 127 static displacement: 128 positions
permanent movement, start upwards,
128 – 191
slow → fast
permanent movement, start downwards,
192 – 255
slow → fast
Channel 9: Colour (for model LSX-120RG only)
000 – 031 red and green laser beams
032 – 063 red laser beam only
064 – 095 green laser beam only
096 – 127 red and green laser beams
red and green laser beams alternating,
128 – 255
slow → fast
All rights reserved by MONACOR
reproduced in any form or by any means for any commercial use.
® INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may be
DMX Value Pattern*
000 – 007
008 – 015
016 – 023
024 – 031
032 – 039
040 – 047
048 – 055
056 – 063
064 – 071
072 – 079
080 – 087
088 – 095
096 – 103
104 – 111
112 – 119
120 – 127
* The laser patterns are shown in an idealized way. Due to the
mass inertia of the moved, mechanical components, over-
swing and rounding-off may occur, depending on the size and
form of the patterns.
Subject to technical modification.
DMX-Wert Pattern*
128 – 135
136 – 143
144 – 151
152 – 159
160 – 167
168 – 175
176 – 183
184 – 191
192 – 199
200 – 207
208 – 215
216 – 223
224 – 231
232 – 239
240 – 247
248 – 255
GB
11